STAAD Pro Steel design parameter question

I am using a W8x35 column in a STAAD Pro file.  The K value is 2, the length of the (rather short) column is 60” and radius of gyration values are rz = 3.51 in and ry = 2.03 in.  Therefore, Kl/ r values are 34.2 and 59.1.  However, the STAAD steel design output (per AISC 13th) are being reported as 82.02 and 98.34, but the output correctly indicates the values for rz and ry.  I rarely use STAAD’s design module, but I am stumped at this.