Re: StaadPro-error
Could you please try increasing the virtual memory of your machine and check if that works ?To increase the virtual memory , right click on MY COMPUTER -> go to PROPERTIES -> in the SYSTEM...
View ArticleRe: StaadPro-error
The model runs on my machine (W7, Core 2 Duo 2.13 GHz, 4GB RAM) but I am using a newer version of STAAD. It took about 30 minutes, I get frustrated if a model takes more than1 minute to run!While...
View ArticleRe: Errors in STAAD Foundation
Bentley products can be downloaded from here: appsnet.bentley.com/myselectcdIn order to find STAAD Foundation Advanced, select Product as STAAD and Files posted within last 1 year.Please note that you...
View ArticleRe: Import Staad pro to SAP2000
Please refer to the following like:www.csiamerica.com/.../ieYou can get idea of import/export format supported in SAP2000.It can directly import a STAAD.Pro model (.std file).
View ArticleRe: Why is Staad pro modifying input file after 2-3 analysis and/or...
I have uploaded 2 files through the secure file upload. These show the differences.The original file is the correct version. The 2nd file is the one that Staad changed automatically. Changes can be...
View ArticleWhen will be SACS compatible version for Windows 8 available?
We are targeting it for SACS 5.7. It should be available around June 2014.
View ArticleRe: When will be SACS compatible version for Windows 8 available?
We are targeting it for SACS 5.7. It should be available around June 2014.
View ArticleClik here to view.
Descon License error
Hi,Whenever we are opening STAAD the following warning is coming.Why is this warning coming every time we open or try to run a file? How can weavoid this warning? regards,Nibu
View ArticleClik here to view.
Re: Descon License error
Hi Nibu,The licenses secured in your Activation Key were verified and we noticed that no license of Descon was listed therein. I guess, you might have configured Descon License by mistake. Therefore to...
View ArticleRe: Errors in STAAD Foundation
Hi,The latest version of STAAD.Foundation Advanced is 06.02.00.59. Go to the Bentley Select site and select the product as “STAAD Products” and download category as “All” to download this patch (STAAD...
View ArticleTransverse and Longitudinal Stiffeners in Standard Beam Members
Good Morning Shany,Do we have the possibility of inserting simple stiffener plates in our analysis model?The design scenario is a beam fixed at both ends subjected to load that induces primary torsion....
View ArticleRe: StaadPro-error
Dear Mr.Geeky,The total paging size / virtual memory I have 16GB.Dear Mr.Petere,I have nearly 20 GB availble in my C-Drive (enough to run analysis).I need all load combos.I think the problem is due to...
View ArticleRe: To gather plates information by using VBA
Hi,I have reviewed your code. If you save the code in .vbs format, import and run the macro in STAAD.Pro, then you can view the results in the display window as shown in the attached screenshot. Also...
View ArticleRe: Soil damping parameter within Staad
Soil Damping can be accounted for by using the SPRING DAMPING command as outlined in section 5.26.5 of the Technical Reference Manual titled Composite Damping for Springs. The general format isSPRING...
View ArticleRe: Transverse and Longitudinal Stiffeners in Standard Beam Members
There is no easy way to account for stiffeners in the analysis part unless you are modeling the entire beam and the stiffeners using plate elements. For models with beam elements, you may consider...
View ArticleRe: IS:456 design issue
Mr. Sanju Whatever has been stated by you about the prmissible stress in concrete may be true for flexural member, not for a column member. Please note that Heading of clause 38 of IS 456 starts with...
View ArticleRe: Staad Pro - Warning Out of Plane Loads Applied in PLANE Structure
Kris - I changed to space eval and yes...I had some global z reactions from the local Y member loads. I'm not sure why as it seems I am applying the load only in the X-Y plane. More info on the...
View ArticleClik here to view.
How do I know that the version of STAAD.Pro, AutoPipe or other Bentley...
To determine if the version of STAAD.Pro and other Bentley products that you are using is certified to run in certain operating system, log in to My Select CD, search by product line. Look for the...
View ArticleRe: Staad Pro - Warning Out of Plane Loads Applied in PLANE Structure
The use of curved members is the most likely reason. The local Y for these members would be normal to the plane of curvature and so loads in local Y would be out of plane loads. We do not recommend...
View Article