Re: how to model shear key
What I could conceive from your explanation is that, you are looking for including the effect and purpose of shear key that could transfer vertical forces from one panel edge to its connected one...
View ArticleStaad Foundation Advanced - A lot of warning during analysis
TeamI saw a lot of warning during analysis and like an expert to help check it. Thanks in advance.ThanksBruceÂ
View ArticleRe: from what all software , the models can be imported into staad pro
STAAD.pro is also integrated with ISM, so you can import from a variety of ISM Enabled applications as well, but at this time loads are not included in the STAAD.pro – ISM...
View ArticleRe: How to define settlement to surface (Staad pro)
Prescribed settlement in STAAD.pro is limited to nodes. The help topic 5.32.8 Support Joint Displacement Specification explains most completely. If part of the wall settles more than other parts of the...
View ArticlePunching Check Tab did not show up
TeamI can not see the punching check Tab in "Details Report". Rember it is there in previous version. What is the reason?ThanksBruce
View ArticleRAM Concept - Torsion in Beam Members
Hello.I have a 2-way flat slab with a banded/uniform PT layout. Â Around my elevator and stair openings, we have beams framing the openings. Â My question is in regards to failures resulting from higher...
View ArticleRe: RAM Concept - Torsion in Beam Members
I have attached the model that I was referencing in my post.
View Articleram elements - shells
Im modeling in a platform in ram elements using shells. although the platform is made out of aluminum, is there a way to select the material as aluminum? i only see steel as a material selection?
View ArticleRe: ram elements - shells
You'll need to add the new material. This wiki shows you how:communities.bentley.com/.../creating-custom-elements-in-ram-elements.aspxKeep in mind, Ram Elements can analyze any kind of elastic...
View ArticleRe: RAM Concept - Torsion in Beam Members
In regards to no-torsion beams, this stiffness reduction is applied to the elements of the beam stem. When the strip includes some portion of the flange in a T or L shaped section there is naturally...
View ArticleRe: Punching Check Tab did not show up
Is this in reference to STAAD Foundation Advanced or some other application? What version are you using?
View Articleram elements - shells
Is there a way to apply a point load to a shell? Im trying to apply a point load to an aluminum plate that i modeled as a shell. or should i model it a different way?
View ArticleClik here to view.
Re: ram elements - shells
Yes, you can apply a nodal load anywhere on the surface of the shell and that load will be resisted by the meshed elements of the shell. All that is required is to add a node at the location of the...
View ArticleRe: Punching Check Tab did not show up
I am using Advanced 6.02. After I add the mat width and thickness, it is showing now.
View ArticleHow to define bolt/shear connection between beam/column in Ram Elements V8i
Hi there, I'm a new user, I'm design a simple steel frame, couple of columns and beams, I know Ram elements consider connection to be welded automatically. But I want to design beam-column connection...
View ArticleRe: ram elements - shells
thanks for the reply, your help is greatly appreciated. im modeling a plate and applying a point load onto it. (like if a fork truck drove onto a metal plate) when i analyze the model, and look at the...
View Articlewebinar
does bentley have weekly/monthly webinars? if so, how do i sign up and whats the schedule?
View ArticleRe: webinar
Log onto selectservices.bentley.com/en-US with your credentials, from there navigate to TRAINING & LEARNING>>Events And Seminars.All related information about seminars/e-seminars are...
View ArticleRe: Kindly advice me what to do now?
print cg command will give only the total structures cg and not a particular plates Cg
View Article