Hi there. There seems to be a "phantom beam" in my RAM analysis model that I am not able to delete. You can see the little beam piece (it looks sort of like a stub cantilever, but white instead of the typical teal color) located at (0,0) in the top left corner of only one level of my model (9 levels total), and I am unable to alter the "beam" in any way. I have included images of the phantom beam and the text for the data check results that give the error for "beam #0" below.
I appreciate any advice that you have to get rid of this beam. I believe that I have tried every typical approach to delete the element.
Data check text:
Error 1 - Beam has span of 0 on Layout Type Level 2.
Beam Coords ( in ) are (0.000,0.000), (0.000,0.000)
User Action: Delete Beam and re-enter.
Error 2 - Beam has span of 0 on Layout Type Level 2.
Beam Coords ( in ) are (0.000,0.000), (0.000,0.000)
User Action: Delete Beam and re-enter.
Error 3 - Frame Beam #0 not supported by frame member on Story Level 2.
Detected at coordinates ( in ) (0.000,0.000)
User Action: Beam must be supported by frame member.
Error 4 - Frame Beam #0 not supported by frame member on Story Level 2.
Detected at coordinates ( in ) (0.000,0.000)
User Action: Beam must be supported by frame member.