Time History Plots
Hi,I have a few questions about time-history analysis using Staad Pro1. Generally how are staad's capabilities doing the dynamic analyses such as time history and response spectrum?2.How to plot...
View ArticleRE: AISC 14th Edition support
The specifications section of the AISC 14th edition manual, known as AISC 360-2010www.aisc.org/.../p-1578-steel-construction-manual-14th-ed-third-printing-hardbound.aspxis implemented in STAAD.Pro...
View ArticleAISC 14th Edition support
Dear Forum Members,Does StaadproV8i (Select series 4) build 20.07.09.31 support 14th Edition steel Manual of AISC? Please clarify. Thanks.Regardskaushal
View ArticleRE: Motion Calculations in Staad.Offshore
I have contacted Bentley's support and it is taking sometime for them to verify/proof the equations. In the meantime, can anyone point me to a site/resource that is good for marine...
View ArticleMotion Calculations in Staad.Offshore
Hi,I am trying to figure out the equations used to generate motion accelerations in Staad.Offshore.Take for example, using the "without gravity/tilt option", in obtaining Ax, Ay, Az, what does all the...
View ArticleRE: Structural Synchronizer Download
Yes, the 32 bit version will not install on a 64 bit system.
View ArticleClik here to view.
Structural Synchronizer Download
Just trying to download the latest Staad release, and see that there are 2 Structural Synchronizer files with different sizes to be downloaded as well. On of them is 64bits. Both files have the same...
View ArticleRE: RAM DataAccess - Gravity Loads and Coordinates
Are you providing a valid unique ID to the method? It is an input argument whereas the other variables in that method are output. The DA manual installs with RAM Structural System and is located in...
View ArticleRE: Staad.Offshore Transport Load Generator Equations
Are there any suggested answer/clarification to my question above? Thanks.
View ArticleClik here to view.
Staad.Offshore Transport Load Generator Equations
Hi,We are using Staad.Offshore v8i (version 3.0.1.2). In the Staad.Offshore technical reference manual available from the Help files, under section 4.2 (Transport), the equations shown are:Please...
View ArticleRE: RAM DataAccess - Gravity Loads and Coordinates
Eric, Thanks again for the response. I believe I am using a valid ID as a test. I pulled an ID via "lUID = IBeam.lUID." Then set my lBeamID to that value to test out my other lines of code. As you...
View ArticleRE: RAM DataAccess - Gravity Loads and Coordinates
I tested a gravity steel beam, lateral steel beam, and gravity concrete beam. I did not experience a problem with IGravityLoads1.GetNumBeamLoads. My only other thought is that you don't have results...
View ArticleRE: StaadPro and SACS tutorials
Dear SirTwo years ago I attend in a SACS course in the UA. You could find the document of this course in my weblog:www.sacssoftware.blogfa.comThis course contains a complete tutorial of the all...
View ArticleStaadPro and SACS tutorials
Hi All, I need some tutorial as to how to specify, model and analyse:- Blast loads- Impact loads- Fatigue loads within StaadPro.Also would someone be able to upload some SACS...
View ArticleSTAAD - INTERNAL ERROR IN K-MATRIX
Hello,I am working on the design of a shop fabricated steel support structure. In this file I am trying to run the different support cases for shipping, lifting, and operation, however I am getting the...
View ArticleRE: STAAD.Pro V8i SELECTseries 5, build 20.07.10.64
Hi,It is recommended to uninstall the previous version of STAAD.Pro first and then install the latest version.Regarding the EC2 code, the draft version of the code was implemented in the batch mode of...
View ArticleClik here to view.
STAAD.Pro V8i SELECTseries 5, build 20.07.10.64
Hi.Is it necessary to uninstall the previous version of STAAD first and then install the latest version mentioned above?I also see that EC2 is no longer available in “Select Default Concrete Design...
View ArticleRE: How to view cross sections
SHIFT + XWith this you will see the section for each member. What I don't know is to add a color to the sections.
View ArticleHow to view cross sections
HiI'm working with steel structure with many beams and columns. How can I view the cross section for every beam and column?I'm using Staad pro V8iThanksRegardsWaleed
View ArticleRE: OpenRE Editing
My goal is to be able have a user interface in Excel in which a user inputs the beam number or numbers (from RAM SS) that they wish to observe. The code would then grab the required beam info and...
View Article