RE: SACS
Dear freindsI have worked on SACS software for many years. I put very good toturial of SACS software on my weblog. www.sacssoftware.blogfa.com you could download them from my weblg. also you could find...
View ArticleSACS
Hi, I need some SACS tutorials dealing with modelling, analysis and design aspects including modelling of dynamic and static loads etc... Many thanks.
View ArticleNodal forces
In analyzing a structure having defined the Sismic definition we go for the load cases say EQX+ve,EQX-ve etc. After analysis how to get the NODAL FOR EQX+VE?Can any one help?T.RangaRajan
View ArticleRE: problem reinstalling STAAD
1. What was the actual problem you experienced when reinstalling STAAD.pro? 2. What exact version of STAAD.pro are you trying to install? 3. What's the operating system?4. Are you administrator of the PC?
View Articleproblem reinstalling STAAD
Hello Dears;I hope u are doing well,I want to ask u something about bently staad pro if it is possible. I have installed the program on my pc and every thing was fine, but due to the lack of the hard...
View ArticlePlate creating problem using in-fill option
Hi,Please see attached model where I created a meshed model using beam members then used in-fill plate option to create FE plates. I selected all beams and then used this option but for some reasion...
View ArticleRE: Create Section Ram Elements 8
See this post: https://communities.bentley.com/products/structural/structural_analysis___design/w/structural_analysis_and_design__wiki/3569.creating-custom-elements-in-ram-elements-tn.aspx(I assume you...
View ArticleRE: Create Section Ram Elements 8
thanks for the quick answer,Yes, I am talking about Ram Elements V8i,Yes I have already been there, but my problem is this one"Give the new table a name in the dialog box that appears, e.g. "My Pipes"....
View ArticleRE: Create Section Ram Elements 8
Sorry, I didn't read your post closely enough. Creating your own section profile or template is more involved. Under the Help - Manual - Chapter 16: Creating New Types of Sections with Macros you will...
View ArticleCreate Section Ram Elements 8
Hi,I use RAM Elements 8 and I would like to create my own section: I created my group, and when I create a new table I only have the choice between the sections that already exist... I would like to...
View ArticleRE: problem reinstalling STAAD
1- I did not face any problem while installing , but after running the program , I keep getting that Trial/Valid license was not found or trial period has expired! Switching to Restricted Mode2- staad...
View ArticleRE: Plate creating problem using in-fill option
Hi,I got the same problem. I thought that your model got some mistakes like a difference of X,Y or Z coordinate, but my thought was worng. I think this a mistake from auto-calculation of staad pro's...
View ArticleRE: STAAD - INTERNAL ERROR IN K-MATRIX
Hi, which version/build of Staad are you using? I ran this model my machine in Select series 5 version but did not come across this error message? Also, are you using the Advanced Analysis Engine?
View ArticleRE: creating tapered box section in Staad pro
Currently, In Staad the facilities to define the tapered I-shaped section and tapered pipe sections are available. We will convey our development team of the Tapered Rectangular section requirement as...
View Articlecreating tapered box section in Staad pro
hi,we are using a tapered rectangular box section for one of our column,how to create the tapered rectangular box section properties in staad pro.?
View ArticleRE: STAAD - INTERNAL ERROR IN K-MATRIX
I am using STAAD V8i, version 20.07.09.11 (SELECT Series 4). I am not using the Advanced Analysis Engine, as my company does not have a need for it. Any idea why this wouldn't run on the version of...
View ArticleStressed skin design using STAAD
Hi,Does anyone have experience using STAAD for stressed skin design principle? I have modelled the frame, plates and stiffeners with correct offsets, but I am not sure how to proceed. Any tips &...
View ArticleRE: problem reinstalling STAAD
It sounds like you might just need to activate it. You can do that from the installation wizard typically, see this topic for details. You can also activate using the Bentley License Management Tool...
View Article