Clik here to view.
What would be the effects Warp Plates in STAAD analysis?
Good day to All (especially the STAAD developers/engineers)I would like to solicit your opinion and perhaps be able to clearly understand my the question that would be of the subject title above.I have...
View ArticleI have an error when i analysis of the structure in staad pro
I have an error when i analysis of the structure. error is elastic modulus (E) not entered for member/element/solid no.58
View ArticleHow to define Lx,Ly & Lz as per IS 800 LSD steel design?
I just started using Steel design parameters...Pls. help me out to give proper Lx, Ly & Lz values for the beams in model attached.Some more queries :1) Whether all Lx,Ly & Lz are required to...
View ArticleSTAAD.Pro Advanced Analysis Engine Limitations
What are the maximum numbers of,1) Nodes2) Beams3) Plates4) Solids5) Load CasesThat STAAD.Pro Advanced Analysis Engine can handle ?Please help. Thanks in advance.
View ArticleHow to get base pressure on raft foundation??
Sir,I modelled the raft foundation using plate element and for soil structure interaction i followed impedance approach (as subgrade modulus of soil was not known.)I.e Soil here is modeled as spring...
View ArticleWhat are the advantages in Staad advanced analysis plus engine ?
What are the advantages in Staad advanced analysis plus engine ?
View ArticleClik here to view.
INTERACTIVE STEEL DESIGN - Code Check Not Completing
Hello All,I am trying to learn how to use the Interactive Steel Design tool in STAAD Pro V8i. I have been following several tutorials and haven followed the steps for creating the load envelop, forming...
View ArticleWhat loads should be considered for transportation of steel structure
I want to know about loading that should be aplied if a steel structure is transported to the site.What the G loading is?what type of supports to be considered for boad cradle design?
View ArticleMicrostran Steel Member Design -for a rotated member
I’m trying to do a member design for a 200 PFC member on it’s side (i.e. the section has been rotated 90 degrees.) I’ll call this a 200PFC SIDEWAYS to avoid any confusion with a standard 200 PFC...
View Articlecounter-fort retaining wall
Dear sir i have designed counter fort retaining wall using plate element but they are not showing a reinforcement concrete section . just we observed see the drawing reinforcement Thanking you
View ArticleSTAAD.Pro - beava - Vehicular Live Load - Does this include centrifugal and...
Hello all,I am currently using the module beava in STAAD.Pro for design of an elevated roadway and was wondering if the vehicular live load in the program accounts for centrifugal and braking forces....
View ArticleSTAAD Pro V8i AISC 360-10 P-M-M
Does STAAD always consider the axial force in both compression and tension when computing the design output for Chapter H of AISC 360-10? I have a member in a structural model with an axial...
View ArticleClik here to view.
RAM Concept - Lateral Load Analysis
Hi Seth / Josh,I am currently setting up a default file for our company and am investigating the use of RAM Concept and lateral loading on a slab. Loading and combinations will be static loading coming...
View ArticleFULL-WIDTH STRIP OR COLUMN-MIDDLE STRIP
Sorry for my questionI can use full-width to design in Eurocode? and if design status is ok with option. mode is ok? we can use result of it?
View ArticleCSP value
Gents ,recently I have working on sunshade steel structure design( FRAME AND TRUSS) , After analysis the model ii found warring regarding CSP value ( THE VALUE OF CSP FOR MEMBER .... DOSE NOT SEEM...
View ArticleOpeining insde plate
Dear Gents,Could you please inform how can create opeing inside plate concrete roof.Thanks in advance
View Articlecopying DJ1 & DJ2 between multiple structures
I have a model that has multiple but symmetrical structures in it, say Structure-1 & Structure-2. I have completed analysis and design of Structure-1 with all necessary design parameters such as...
View ArticleStaad Plates (axial and shear force)
Can staad plates can analyze and design a shear wall?If can meaning plates can carry shear force and axial forces?Because I'm designing residential and client want as soon as possible they want column...
View ArticleClik here to view.
Another New Formwork System - Plastic Modular Formwork
Aѕ іt is knоwn, fоrmwоrkѕаrе by and lаrgе ѕhареd of an еdgе frаmеd by аn arrangement оf metal оr wооd plates ѕuіtаblу orchestrated to get the ѕоlіd whісh, when solidified, frаmеѕ the wall оr...
View ArticleClik here to view.