RE: STAAD FDN ADVANCED - SAMPLE COMB FOOT 4 - UNABLE TO VALIDATE - FOOTING...
I believe there is a bug in the Combined foundation Toolkit mode. It works when there is no shear force (FX/FZ) but as soon as i give even an insignificant value (say 1kN) to FX or FZ, the design...
View ArticleRE: Moving load in Staad.Pro
How can I generate a HORIZONTAL moving load?? is ti possible? I am not able, I just can get vertical moving loads.Thanks in advance.
View ArticleRE: Moving load in Staad.Pro
You may check this forum post: communities.bentley.com/.../94502.aspx
View ArticleConnection Module in Ram Elements
Is there a way to assign a connection (specifically a base plate) in RAM elements but not have the connection be designed? I'd like to assign the connection then go into the module and set the design...
View ArticleRE: Connection Module in Ram Elements
You would need to create a custom connection and then customize the toolbar so that the custom connection can be assigned. See page 58-65 in the RAM Connection Manual for more information on creating...
View ArticleRE: Ram Elements - Shell Interfaces
Please upload your model for review. Please let me know if you need instructions for sharing the file.Karl Gullerud
View ArticleTower Model_
Hi,Attached is my (basic) model where I am trying to analyse tower model with various vertical positions. The tower is hinged at the base and will assume various vertical positions with 15 degree...
View ArticleRE: Tower Model_
It is the right model.Imagine this tower like a crane boom in horizontal rest position and it does a luffing motion about its hinged bases, the vertical rotation will be about z axsis, wouldn't it!!I...
View ArticleRE: Staad Files
i know that thx but iam asking about web location in bently site not in the installed location
View ArticleRE: MODELLING MOVING LOAD WITH HORIZONTAL LOADS (FX AND FZ)
dear friends in the above example i dont know how you'r controling the position of the notional load ??NOTIONAL LOAD109 X 0.1 NOTIONAL LOAD109 Z 0.1 what did you mean by 109 ???
View ArticleRE: Staad Files
I am not aware of such location. You may check some White Papers (pdf documents showing how some structures were modeled) here: www.bentley.com/.../STAAD.Pro
View ArticleStaad Files
I remeber that there was a location which containe staad files for many project which are complicated or diffecult to construct or talking about advanced topic and i forget the location >>>...
View ArticleMODELLING MOVING LOAD WITH HORIZONTAL LOADS (FX AND FZ)
hi everyone,how can i model moving loads using LOAD GENERATION that have horizontal loads (Fy, Fx and Fz)is staad have any facilities for this type of moving loads? can i custumize the vehicle...
View ArticleRE: MODELLING MOVING LOAD WITH HORIZONTAL LOADS (FX AND FZ)
109 is a load case number of the generated load case which contains vertical load. The vertical load due to the moving vehicle will be created at the location on the beam where the wheel falls. The...
View ArticleClik here to view.
RE: Brackets in Staad.Pro
Hi afconsult,You can model the haunch as per pictures below:orand optionally
View ArticleBrackets in Staad.Pro
I am working with some frames that I consider they need to be strengthened with some brackets in the joints of the column and the roof beams (see the attached picture). I know that it is possible in...
View ArticleRE: IS800-2007 Limit State Method - STADD Issue
Hello Sir,Thanks for welcoming me to Bentley Communities. Please let me know your good name and contact details for my storage and further use.I must go through the link you have posted and verify your...
View ArticleRAM Connection Gusset joints
I am trying to get a gusset join for braced elements and this is what I get.Where can I assign this property to each element that form the joint??If anybody could help me.Thanks in advance
View ArticleRE: RAM Connection Gusset joints
Make sure that the vertical brace members are defined as TRUSS member types. See the following web page for more tips on using RAM Connection within...
View ArticleClik here to view.
RE: Ram Concept Font Color Change
The "Load" Object in the Print tab of the Appearance Settings dialog should change the color of the load symbol (including arrows) and the color of the load magnitude.
View Article